Free Lead Inspector Third-Party Examination Practice Questions
60 free questions · Answer explanations · No signup required
View examination details, outline and sourcesLoading selected examination banks…
Sample Practice Questions
Try these 10 sample questions from the Lead Inspector Third-Party Examination practice bank. Each includes the answer and explanation. Continue with the interactive practice above to review the full question set.
1A Kansas client asks for a lead inspection that will also determine lead concentrations in dust and soil. Which response correctly describes the statutory inspection scope?
- A. The inspection may determine lead in surface coatings, dust, and soil but not water.
- B. The inspection may determine lead only in dust and soil and then issue a hazard-control plan.
- C. The inspection identifies lead concentrations in surface coatings and reports the results; dust, soil, and water determinations are outside that inspection.
- D. The inspection determines lead in all environmental media but reports only paint results.
Answer: C
Explanation: K.A.R. 28-72-1l(g) states, "The inspection shall not include any attempt to determine lead concentrations in soil, water, or dust." The requested paint investigation can be an inspection, but the additional media require a different authorized evaluation scope.
2Which description accurately states Kansas's adopted configuration of the HUD Guidelines?
- A. The June 1995 edition, excluding Chapters 1 and 2, including Appendices 7, 8, and 11 through 14, with the 1997 Chapter 7 revision
- B. The June 1995 edition, including Chapters 1 and 2, excluding all appendices, with the 1996 Chapter 7 revision
- C. The June 2003 edition, excluding Chapters 3 and 4, including Appendices 1 through 6, with its original Chapter 7
- D. The July 2008 edition, excluding Chapters 8 and 9, including Appendices 8 through 13, with the 2002 Chapter 7 revision
Answer: A
Explanation: K.A.R. 28-72-13(d)(1)(A) adopts the Guidelines "dated June 1995, excluding chapters 1 and 2 and including appendices 7, 8, 11, 12, 13, and 14" and states that "the 1997 revision of chapter 7 is adopted." Option A preserves the complete Kansas configuration.
Reference: Kansas Lead Regulations — K.A.R. 28-72-13(d)(1)(A)
3Which Kansas requirement controls the analysis of paint during a lead inspection?
- A. Use the documented methodologies adopted by the Kansas lead rules.
- B. Use any method selected by the property owner.
- C. Use only a method approved in writing by the local fire department.
- D. Use the firm's customary method without regard to adopted methodologies.
4Which set belongs in the property-identification portion of a Kansas lead inspection report?
- A. Inspection date, building address, construction date, applicable apartment numbers, and owner contact information
- B. Inspector name, signature, certificate number, and employing-firm contact information
- C. Testing method, sampling procedure, quality-control data, and XRF device information
- D. Laboratory result category, laboratory name, and laboratory certification number
Answer: A
Explanation: K.A.R. 28-72-14(c)(2)(A)-(E) requires "The date of each inspection" and "The address of the building" together with the construction date, applicable apartment numbers, and owner contact information. These fields identify the inspected property and responsible owner.
Reference: Kansas Lead Regulations — K.A.R. 28-72-14(c)(2)(A)-(E)
5For what type of violation may the Kansas secretary issue a notice of noncompliance under K.A.R. 28-72-22?
- A. Only a violation causing a confirmed childhood poisoning
- B. Only a repeated violation after a civil penalty
- C. Any violation of the Act or the Kansas lead regulations
- D. Only a violation committed by a licensed firm
6A firm assigns one portion of a Kansas lead inspection to an employee. Which pair of certifications may lawfully perform that inspection work?
- A. Lead inspector or risk assessor
- B. Lead abatement worker or project designer
- C. Lead abatement supervisor or renovator
- D. Project designer or elevated blood-lead investigator
7Which second documented methodology does Kansas adopt alongside the HUD Guidelines?
- A. EPA Residential Sampling for Lead: Protocols for Dust and Soil Sampling, final report dated March 29, 1995
- B. EPA Lead Safety for Remodeling, Repair, and Painting curriculum dated June 2003
- C. HUD Guidelines for the Evaluation and Control of Lead-Based Paint Hazards in Housing dated June 1995
- D. OSHA Lead in Construction standard in 29 CFR 1926.62
8A Kansas inspector collects a paint-chip sample. What analytical outcome must the laboratory procedure provide?
- A. A positive-or-negative category without a numerical concentration
- B. Quality-control data without a numerical concentration
- C. A detectable lead result that can be quantified numerically
- D. A sampling-method unit without a numerical concentration
9Which identifying information must a Kansas inspection report provide for every certified inspector or risk assessor who conducted testing?
- A. Name, signature, and certificate number
- B. Firm name, address, and telephone number
- C. Laboratory name, address, and certification number
- D. Testing method, device serial number, and quality-control data
Answer: A
Explanation: K.A.R. 28-72-14(c)(2)(F) requires "The name, signature, and certificate number of each certified lead inspector or risk assessor, or both, conducting testing." Those three identifiers document professional accountability.
Reference: Kansas Lead Regulations — K.A.R. 28-72-14(c)(2)(F)
10What is the recommended Kansas response for a first-time violator of Article 72?
- A. A notice of noncompliance
- B. A written order requiring compliance
- C. Certificate suspension or revocation
- D. A civil penalty
Topics in this practice bank
These topics describe the available practice for Lead Inspector Third-Party Examination. Review the examination outline and its sources for scope and allocation details.
Kansas legal scope and professional responsibility
- Authorized inspection scope and regulated-property applicability
- Conflicts, firm relationships, and individual compliance duties
Kansas inspection methodology and site selection
- Adopted methodologies and the stricter-requirement hierarchy
- Component selection, distinct painting histories, common areas, and exclusions
Kansas sampling and analysis requirements
- Paint testing, sample collection, and quality control
- Laboratory recognition, measurement, and method limitations
Kansas inspection reports and records
- Required identification, methods, quality-control, and result documentation
- Report delivery and record retention
Kansas compliance and enforcement
- Notices of noncompliance and corrective action
- Certificate discipline, penalties, appeals, and remedies
How to use these free practice questions
Choose an answer, check the explanation, and review your progress by chapter. Practice questions and explanations are free to access without signing up.
These are independent study questions, not actual examination items. For examination requirements and official information, view Lead Inspector Third-Party Examination details.